This is a professionally designed cosplay prop for Herta Hammer from the video game Honkai: Star Rail. Quality-focused for high-accuracy cosplaying and easy 3D Printing. A perfect addition to your Herta Cosplay.
Please message me via chat window or through the contact pagehereif you would like a prop that is not yet listed.
ITEM DIMENSIONS ********************* - Length: 1500 mm (5 feet) and 1830mm (6 feet) [Standard] - Custom Dimensions (for example for a smaller doll or figurine or to match your height better) [Upon Request]
3D PRINT BED DIMENSIONS ******************************* - Length: 200mm ( 8") | Width: 200 mm (8") | Height: 200 mm (8") [Standard] - Length: 150mm ( 6") | Width: 150 mm (6") | Height: 150 mm (6") [Upon Request] - Length: 129 mm ( 5") | Width: 60 mm (2.3") | Height: 150 mm (6") [Upon Request] - Custom Dimensions [Upon Request]
3D FILE DETAILS ****************** There are 4.25 mm (for 4mm or 5/32" wooden dowels) dowel slots to help align each piece during gluing and provide additional structural stiffness and support.
There are 13.5 mm (for 12.5mm or 1/2" wooden dowels) dowel slots to help align each piece during gluing and provide additional structural stiffness and support.
There is 20 mm (for 3/4" or 19mm wooden dowels) dowel slots to help align each piece during gluing and provide additional structural stiffness and support.
The 20mm dowel also acts as part of the hammer model and should be 4 feet long to create a 5-foot-tall hammer. You can shorter or lengthen this dowel to change the overall length of the hammer if you want.
For the 6-foot scale hammer, 16.5 mm (for 16mm dowels or 5/8" dowels) dowel slots and a 23mm dowel slot (7/8" or 22mm dowel) are used instead.
3D PRINTED KIT DETAILS *************************** Parts are printed in white PLA+ filament with scaffolding supports removed.
3D PRINTING RECOMMENDATIONS ************************************** I recommend printing the parts with three perimeter walls, 10% gyroid infill, at 0.2mm layer height. I also recommend using PLA+ filament as it is much stronger than PLA filament and requires less material to develop strength.
CONTACT AND MISCELLANEOUS ************************************* I did my best to position the seams to be hidden easily or easily sandable. I also positioned the slices to allow for preservation of the fine model details when you 3D print the pieces.
Please message me if you have any questions before or after your purchase and I will be happy to help! Let me know if there is a specific prop or weapon you want a 3D model of and I can likely make it for you.
